Subject | Text |
I need a users manual for a Samsung model TXB1940 H | Tbis TV was given to my kid, and I can't seem to get it to program it's Cable chanels in and could u |
shema Samsung | Check this file:
http://www.eserviceinfo.com/download.php?fileid=7879
Thanks ! |
|
Chassis PT92 | Dead EEPROM 24C16W6. :(
Need the .bin file for it.
MCU: TDA9351 PS/N2/2I1185C. |
| It should be chassis icc5
try this one
http://www.eserviceinfo.com/download.php?fileid=2222 |
Sharp DV5407 (DECO5) | Need schematic for Sharp DV5407S (DECO5 chassis). Found similar at http://www.eserviceinfo.com/downl |
Fujitsu plasma SOT ID | I have a PDP driver board and I need to ID 2 components They are a SOT case with 3 lead on one side |
| PS42V6 is a plasma tv, fault could be lower scan pcb or connectors to pdp, or a bad pdp |
| Check the resistor on the flat cable from PCB to PDP module. When is resistor broken try change it. |
BN44-00662A SCHEME | PLS. SEND ME SAMSUNG 40F6400 TV PSU SCHEME
CADR MODEL BN44-00662
THANKS YOU IN ADVANCE. MO |
| what square is D701 in, in the complex assembly diagram?
yes i have a soldering iron and know h |
| Daewoo DTQ-20V1 is a chassis CN-001M.
Check this file:
http://www.eserviceinfo.com/download.php |
panasonic TC-21L3A tv | hi, could anyone help with a panasonic TC-21L3A tv on a mx1 chassis service manual.
thanks
regar |
goodmans gtv42p | I require a service manual for goodmans gtv42p it uses a samsung S42D-YD05 pdp panel thanks gary |
Need help with testing TV components | Hi Everyone,
I have a 42" plasma TV that wont turn on. The little research Ive done points to |
| Welcome to plasma's. Seems with x/y disconnected VS and Va are ok indicating a good power supply. Ho |
Re: Need Schematic Diagram monitor Philips 107s | [quote:03c22876f5="MikoBG"]Philips ID 17C2321N/00Z made in Hungary
chassis: 9300.2 WK:9803 ???????? |
tech tip rca tv itc008fam | need tech tip on rca tv model 27r410t chassis itc008fam. won't power up. voltage drop on secondary s |
|
NEC RD-317, PX-RC1E | Hello !
I am looking for programming manuals RD-317, lcd remote controller for NEC PDP monitors. |
Phillips 42pf9966/37 | When I push power button on side of TV I hear a click as it tries to turn on. It had a bad fuse for |
| As far as i see it is an 11AK19P chassis
so try this one
http://www.eserviceinfo.com/download.php? |
| Hello, you must change the chassis assy.
The code number is A7018245B.
After make the adjustment. |
LG Flatron MZ-42PZ24-After turning it on,it turns to standby | Hello,
i hope someome can help me with this problem on my LG PDP Plasma TV:
When you turn it o |
Looking for a couple of Plasma TV boards | I'm trying to fix my plasma and need the following boards to do so:
SDBD 6871QDH067B
YSUS 6871 |
Manual de service TV TELEFUNKEN | I need service manual for TV TELEFUNKEN SLX 295 PIP Chassis: ICC5 618 B-2PIP
Thanks in advance
|
Problem to unload information. | :cry: I am presenting problems for the service manual unloading of the chassis L9.1 de Philips. Af |
| definetly not the z sus board, either the buffer board at the bottom of the pdp or more likely the p |
Re: NEC RD-317, PX-RC1E | Did you ever find a programming manual? I'm looking for one too. Would appreciate any help. vendor |
Plasma Screen SONY PFM 42B2E | Hello Everyone,
I was wondering if someone could help me out who has some knowledge on Presentati |
Samsung Plasma -no picture/sound -just clicks | Samsung 42SD 5SD -42" Plasma
No picture or sound. Turn it on, clicks and the neon flashes 5 |
Advent DvD/TV combo DV2418A | The unit powers up but no pic or sound have checked for cracks in chassis and all caps all seems to |